Panasonic DP-180 - Page 268

268
UF-9000
APR 2006
Ver. 3.0
DP-180/190
The Firmware in the table below are not interchangeable.
Firmware for machines with Serial No. prefix CF [March 2006] and above for USA/Canada (may differ for
other destinations). (Navy Blue Control Panel), cannot be used on machines with Serial No.
prefix BF [February 2006] and below for USA/Canada (may differ for other destinations).
(Light Blue Control Panel).
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
2. Please refer to the service manual for additional details.
3. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.
Parent Firmware File Folder Sub Firmware File Folder Firmware File
Transferring
Order
\ UF-9000_AUR_xxxxxx
(Navy Blue Control Panel)
\ SC_STD \ DX-TrirAxVxxxxx_xx
DX-TrirAxVxxxxx-xx.bin 1
\ SC_PCL \ DX-TrirBxVxxxxx_xx
DX-TrirBxVxxxxx_xx.bin
DX-TrirCxVxxxxxa_xx.bin
DX-TrirCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DX-TrirDxVxxxxx_xx
DX-TrirDxVxxxxx_xx.bin
DX-TrirExVxxxxxa_xx.bin
DX-TrirExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx
DX-TRI-SAxVxxxxxx.bin 2
\ UF-9000_AU_xxxxxx
(Light Blue Control Panel)
\ SC_STD \ DX-TriAxVxxxxx_xx
DX-TriAxVxxxxx-xx.bin 1
\ SC_PCL \ DX-TriBxVxxxxx_xx
DX-TriBxVxxxxx_xx.bin
DX-TriCxVxxxxxa_xx.bin
DX-TriCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DX-TriDxVxxxxx_xx
DX-TriDxVxxxxx_xx.bin
DX-TriExVxxxxxa_xx.bin
DX-TriExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx
DX-TRI-SAxVxxxxxx.bin 2
\ DP-190_180_xxR_xxxxxx
(Navy Blue Control Panel)
\ SC_STD \ DP-TrirAxVxxxxx_xx
DP-TrirAxVxxxxx-xx.bin 1
\ SC_PCL \ DP-TrirBxVxxxxx_xx
DP-TrirBxVxxxxx_xx.bin
DP-TrirCxVxxxxxa_xx.bin
DP-TrirCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DP-TrirDxVxxxxx_xx
DP-TrirDxVxxxxx_xx.bin
DP-TrirExVxxxxxa_xx.bin
DP-TrirExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx
DP-180_190SPCAxVxxxxxx.bin 2
\ DP-190_180_xx_xxxxxx
(Light Blue Control Panel)
\ SC_STD \ DP-TriAxVxxxxx_xx
DP-TriAxVxxxxx-xx.bin 1
\ SC_PCL \ DP-TriBxVxxxxx_xx
DP-TriBxVxxxxx_xx.bin
DP-TriCxVxxxxxa_xx.bin
DP-TriCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DP-TriDxVxxxxx_xx
DP-TriDxVxxxxx_xx.bin
DP-TriExVxxxxxa_xx.bin
DP-TriExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx
DP-180_190SPCAxVxxxxxx.bin 2
When you select the Parent Folder, the following Firmware Type window
appears. Proper Firmware Files are selected automatically by selecting
the Firmware Type.
The transferring order is set up automatically.