285
UF-9000
APR 2006
Ver. 3.0
DP180/190
(6) Remove 7 Screws.
(7) Remove the SC Cover.
(8) Remove the Black Pin Protector from Slot 1
(CN327) [Lower], if it was preinstalled.
(9) Install 2 PC Board Supporters for the Slot 1
(Lower) on the SC PC Board.
(10) Install the Program Expansion Board into Slot
1 (CN327) [Lower] on the SC PC Board, and
secure with the Supporters.
Note:
The Program Extension F-ROM Board must
always be installed into Slot 1 (CN327) [Lower] for
the PCL or PCL/PS Printer Option to function.
(11) Proceed with the installation of other options.
If finished, reinstall all Harnesses, and Covers.
(12) Plug the AC Power Cord, and turn the Power
Switch on the Left Side of the machine to the ON
position.
(13) Reconnect the Telephone Line Cable if it was
disconnected.
To Next Page
Loading...
