287
UF-9000
APR 2006
Ver. 3.0
DP180/190
(4) Disconnect the Speaker Harness.
(5) Release the Harness from the Harness Clamp.
(6) Remove 7 Screws.
(7) Remove the SC Cover.
(8) Insert the SDRM PC Board into the Socket on
the SC PC Board as illustrated.
Note:
Make sure to align the notch first, and insert the
SDRM PC Board at a 20 - 30° angle into the
memory socket, and then lock it down.
(9) Proceed with the installation of other options.
If finished, reinstall all Harnesses, and Covers.
(10) Plug the AC Power Cord, and turn the Power
Switch on the Left Side of the machine to the ON
position.
(11) Reconnect the Telephone Line Cable if it was
disconnected.
To Next Page
Loading...
