296
UF-9000
APR 2006
Ver. 3.0
DP-180/190
(10) Install 3 Harness Clamps.
(11) Install the Mechanical Counter.
(12) Secure the Mechanical Counter with 1 Screw.
(13) Secure the MC Harness with 3 Harness Clamps.
(14) Connect the MC Harness to CN302 on the SC
PC Board.
(15) Cut the Protective Tab on the Right Cover.
(16) Proceed with the installation of other options.
If finished, reinstall all Harnesses, and Covers.
(17) Plug the AC Power Cord, and turn the Power
Switch on the Left Side of the machine to the ON
position.
(18) Reconnect the Telephone Line Cable if it was
disconnected.
To Next Page
Loading...
