Panasonic DP-180 - Page 44

44
UF-9000
APR 2006
Ver. 3.0
DP-180/190
2.2.1.4. Feed Roller (516)
(1) Remove the Document Guide.
(Refer to 2.2.1.3.)
(2) Remove the ADF Cover. (Refer to 2.2.1.2.)
(3) Remove 2 Silver Screws (V7).
(4) Remove the front Pin (425).
(5) Remove the rear Pin (425).
(6) Remove the Upper ADF Feed Unit.
(7) Remove the Wire Clamp.
(8) Remove 3 Screws (V9).
(9) Remove the Motor Attachment Plate.
(10) Disconnect the Harness on the ADF PC Board
(PA05).
(11) Remove the ADF Feed Unit.
(12) Remove 5 Gears.
(13) Remove 2 Silver Screws (V7).
(14) Remove the Rear Attachment Plate.