Panasonic DP-180 - Select a Station (PCs IP Address)

47
UF-9000
APR 2006
Ver. 3.0
DP-180/190
2.2.2. Control Panel Unit
2.2.2.1. Battery (128), PNL1 PC Board (1905), PNL2 PC Board (1906), PNL3 PC Board
(1907), PNL5 PC Board (1909), PNL4 PC Board (1908), LCD Module (127)
<Replace the Battery>
(1) Remove 1 Screw (V6).
(2) Remove the Battery Holder (102).
(3) Replace the Battery (128).
Note:
Ensure that the battery is installed with correct
polarity.
(4) Reinstall the Battery Holder (102) and the
Screw (V6).
<Control Panel>
(5) Remove 2 Screws (V7).
(6) Remove the Control Panel Unit.
(7) Disconnect 2 Harnesses.