Panasonic DP-180 - Page 55

55
UF-9000
APR 2006
Ver. 3.0
DP-180/190
2.2.5. PC Board
2.2.5.1. SC PC Board (1901), FXB PC Board (1903), CTRL PC Board (1902)
(1) Remove the Right Cover. (Refer to 2.2.4.2.)
(2) Remove 7 Screws (U1).
(3) Remove the SC Cover (701).
(4) Remove 2 Screws (U1).
(5) Remove the PCB Cover (620).
(6) Remove 1 Screw (U1).
(7) Remove the Spring Plate (705).
(8) Unlock the Harness Clamp fastening the USB
Cable.
(9) Disconnect the USB Cable (1923) on the SC PC
Board (CN305).
(10) Release the USB Cable from the Harness
Clamp.
(11) Disconnect all the Harnesses on the SC PC
Board.
(12) Remove 7 Screws (U1).
(13) Remove the SC PC Board (1901).