Panasonic DP-180 - Page 80

80
UF-9000
APR 2006
Ver. 3.0
DP-180/190
The Firmware in the table below are not interchangeable.
Firmware for machines with Serial No. prefix CF [March 2006], and above for USA/Canada (may differ for
other destinations). (Navy Blue Control Panel), cannot be used on machines with Serial No.
prefix BF [February 2006] and below for USA/Canada (may differ for other destinations).
(Light Blue Control Panel).
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
2. Please refer to the service manual for additional details.
3. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.
Parent Firmware File Folder Sub Firmware File Folder Firmware File
Transferring
Order
\ UF-9000_AUR_xxxxxx
(Navy Blue Control Panel)
\ SC_STD \ DX-TrirAxVxxxxx_xx DX-TrirAxVxxxxx-xx.bin 1
\ SC_PCL \ DX-TrirBxVxxxxx_xx DX-TrirBxVxxxxx_xx.bin
DX-TrirCxVxxxxxa_xx.bin
DX-TrirCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DX-TrirDxVxxxxx_xx DX-TrirDxVxxxxx_xx.bin
DX-TrirExVxxxxxa_xx.bin
DX-TrirExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx DX-TRI-SAxVxxxxxx.bin 2
\ UF-9000_AU_xxxxxx
(Light Blue Control Panel)
\ SC_STD \ DX-TriAxVxxxxx_xx DX-TriAxVxxxxx-xx.bin 1
\ SC_PCL \ DX-TriBxVxxxxx_xx DX-TriBxVxxxxx_xx.bin
DX-TriCxVxxxxxa_xx.bin
DX-TriCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DX-TriDxVxxxxx_xx DX-TriDxVxxxxx_xx.bin
DX-TriExVxxxxxa_xx.bin
DX-TriExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx DX-TRI-SAxVxxxxxx.bin 2
\ DP-190_180_xxR_xxxxxx
(Navy Blue Control Panel)
\ SC_STD \ DP-TrirAxVxxxxx_xx DP-TrirAxVxxxxx-xx.bin 1
\ SC_PCL \ DP-TrirB
xVxxxxx_xx DP-TrirBxVxxxxx_xx.bin
DP-TrirCxVxxxxxa_xx.bin
DP-TrirCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DP-TrirDxVxxxxx_xx DP-TrirDxVxxxxx_xx.bin
DP-TrirExVxxxxxa_xx.bin
DP-TrirExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx DP-180_190SPCAxVxxxxxx.bin 2
\ DP-190_180_xx_xxxxxx
(Light Blue Control Panel)
\ SC_STD \ DP-TriAxVxxxxx_xx DP-TriAxVxxxxx-xx.bin 1
\ SC_PCL \ DP-TriBxVxxxxx_xx DP-TriBxVxxxxx_xx.bin
DP-TriCxVxxxxxa_xx.bin
DP-TriCxVxxxxxb.bin
1-1
1-2
1-3
\ SC_PS \ DP-TriDxVxxxxx_xx DP-TriDxVxxxxx_xx.bin
DP-TriExVxxxxxa_xx.bin
DP-TriExVxxxxxb.bin
1-1
1-2
1-3
\ SPC \ DX-TRI-SAxVxxxxx DP-180_190SPCAxVxxxxxx.bin 2
When you select the Parent Folder, the following Firmware Type window
appears. Proper Firmware Files are selected automatically by selecting
the Firmware Type.
The transferring order is set up automatically.