Panasonic DP-2310

26
Making Copies
Basic Menu
■ Tandem/Remote Copy Settings (Registration 1)
It is necessary to input the Key Operator
ID code.
Input ID Code
(4-digit)
Enter the key name
∗
(up to 15 characters).
∗
By default, the key name will
be up to 15 characters of the
station’s name.
■ Tandem/Remote Copy Settings (Registration 2)
If either DP-2310 or DP-3010 is installed
on a network with a different subnet mask,
must first register the DP-2310 or DP-3010
before being able to use the
Tandem/Remote Copying function.
Scroll to
04/04
IP Address
Ex: 123.123.12.1
When entering a one or
two digit address, add
“00 “ or “0” in front of
the address, or enter “
“
after address.
■ Tandem/Remote Copy Settings (Editing)
To edit the registered machine’s settings
(IP Address, machine name or key name).
Open the screen
04/04 same as
above procedures
(Registrations).
■ Tandem /Remote Copy Settings (Deleting)
To delete the registered machine.
Open the screen
04/04 same as
above procedures
(Registrations).
1
4
7
1 2
5 6
1 2
1 2