Panasonic DP-2310

52
Function
■ GENERAL SETTINGS
Screen
No.
00 Power On Default Mode Selects mode. Copy
● Copy, Printer, Scanner*, Fax*/Email*
01 Manual Copy Quality Adj Sets to activate the manual density control. Off
● Off, On
02 Manual Add Toner Adds toner manually. Off
● Off, On
03 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
04 Departmental Counter Indicates the department counter.
Consult with an
authorised service
provider
09 Key Operator Mode Input the Key Operator ID Code.
Modes Function
Initial
Setting
01/02
02/02
■ COPIER SETTINGS
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
● 5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
● 5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
● 15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
● No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
● No, 1 to 2, 2 to 2, Book to 2
05 N in 1 Default Mode Selects the N in 1 default mode 2 in 1
● 2 in 1, 4 in 1, 6 in 1
06 Reduce N in 1 For Space Selects whether to disable edge deletion No
● No, Yes
07 Booklet Default Mag. Select the booklet magnification Reduce
● 100%, Reduce
08 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Normal
● No, Normal, Quality
09 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off
● Off, M1 On, M2 On, M1&M2 On
Modes Function
Initial
Setting
01/04
02/04
∗
When the optional Network Scanner Module/
Fax Communication Board is installed.