Panasonic DVD-RV31

5.6. Mechanism Unit
1. Unscrew the screws.
2. Remove the connectors.
3. Pull out the mechanism unit vertically.
5.7. Terminal P.C.B.
1. Unscrew the screws.
2. Remove the solders.
3. Remove the connectors.
5.8. Module P.C.B.
1. Unscrew the screws.
2. Remove the connectors.
3. Press each tab with the nipper to pull out the module PCB
vertically.
5.9. Front-1 P.C.B., Front-2 P.C.B.,
and Front-3 P.C.B.
1. Unscrew the screws.
2. Release the tabs.
5.10. Rear panel
1. Unscrew the screws
2. Release the tabs.
9
DVD-RV31 / DVD-RV41