21
6.10. Checking After Assembly [80]
Proceed the procedures of 6.1. Preparation of Secret Mode.
Insert the Power cord to the power source, and turn off the Power source switch box.
1. While pushing the buttons of and , turn on the Power source switch box and wait for more than three seconds. (“80” is
shown on the display.)
2. Push the buttons of and till 82 appears, and push the OK button. Massage mechanism block starts moving.
* When you want to stop the operation halfway, push the buttons of On/Off or stop.
* After all the courses are over, it beeps once and the checking finishes.
Course list
STEP
No.
Operation Number of
times
Position Speed Notes
Up/down Width
0 Sensing 1 Checking the shoulders, seat positions
1 Back rolling 1 10 Wider 5 Checking the up/down medium, clockwise
2 Massage upwards 3 10 5 Checking the masaging medium, clockwise
3 Massage downwards 3 10 5 Checking the masaging medium, counter-clockwise
4 Tapping 2 10 Narrower 5 Checking the tapping
5 Back rolling 1 3 Narrower 5 Checking the up/down medium, counter-clockwise
6 Back rolling 1 0 Narrower 1 Speed decreases, and stops
To Next Page
Loading...
