Panasonic EP-MA03

46
9.13. Removal of the Massage Mech-
anism Block
1. Remove the Rear cover referring to the 9.2. Removing
the Rear Cover.
2. Remove three screws and the Rail piece left and install
the jig.
3. Remove three screws and the Rail piece right.
Caution:
Hold the Massage mechanism block so that it may not
fall down.
4. Holding the Massage mechanism block, remove the jig.
Caution:
Be careful that the Massage mechanism block
may fall down after the jig is removed.
5. Holding the Guide roller, remove the Massage mecha-
nism block. Otherwise, the Guide roller may pop out.