52
9. Remove the Ottoman base cover with care to five Hooks
on right and seven Hooks on left.
10. Remove four screws each on right/left sides, which install
the Rotation shaft, and remove the Ottoman.
11. Pull out the tip of the zippers and cut Cable ties, and open
the zippers. Remove five J-shaped hooks and open the
Cover.
Caution
• When in assembly, pass the tips of the zippers though
the hole of the rubber. Bind the left tip of the zippers with
a Cable tie.
12. Remove four screws and remove the Cushion.
13. Pull out the tip of the zippers and cut Cable ties, and open
the zippers.
14. Remove six screws, which install the Foot under cover,
and remove the Cover.
To Next Page
Loading...
