56
Caution
Hold the Massage mechanism block by hand not to have it
fall down.
Be careful of the directions of the Rail piece set left/right.
Caution in handling the Massage mechanism block
Be sure to handle the Massage mechanism block carefully
so that the PCB of the Pressure sensor is not pushed to the
desk or given extra pressure when putting the Massage
mechanism block, which could lead to the crack of the PCB.
This may eventually cause the malfunction such as “The
Body pressure levels on the Controller does not increase.”
“It does not scan,” or “The operation is not stable.” etc.
To Next Page
Loading...
