Panasonic EP-MA73

67
9.20. Removing each Lift units
9.20.1. Removing the Ottoman lift unit
1. Proceed all the procedures of 9.15. Removing the Massage mechanism block.
* The work would be safe and easy if the Massage mechanism block is removed.
2. Proceed the procedures of 1-7 of 9.12. Removing the Under box, and disconnect the Connectors of the Ottoman lift unit
(CN11, CN13) and removing the Grounding terminal on the Sub PCB.
3. Remove the Ottoman pin long and the Snap pin, and you can remove the Ottoman lift unit.
* It would be easier to remove the Ottoman lift unit after removing the Massage mechanism block.
Caution in installing
When you install the Snap pin, bend the Snap pin at approx. 45 degree.