Panasonic FP7 Series Additional Functions Manual

MEWTOCOL-COM
5-2
5.1 List of Commands
The following new commands are supported.
List of commands
Command name
Code
Overview
Read timer set value area
RS
Reads the timer set value (lower 16 bits of TS).
Write timer set value area
WS
Writes to the timer set value (lower 16 bits of TS). (Note 3)
Read timer elapsed value area
RK
Reads the timer elapsed value (lower 16 bits of TE).
Write timer elapsed value area
WK
Writes to the timer elapsed value (lower 16 bits of TE). (Note 3)
(Note 1) Some devices cannot be accessed due to format limitations of MEWTOCOL-COM communication
commands.
(Note 2) With the four MEWTOCOL-COM commands newly supported, it is possible to access the timer and counter
on the conventional models (FP2/FP2SH). On FP7, however, it is possible to access the timer only.
(Note 3) "H0000" is written to the high words of TS or TE.

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English