1.1 Introduction of FP7 CPU Unit Ver.4.20
The following functions have been added to FP7 CPU Unit Ver.4.20.
Additional functions
1. Instructions and communication commands which are convenient for migrating to FP7
CPU Unit from FP2 CPU Unit have been added.
TM16，CT16-
* For details, refer to Chapter 2 Basic Instructions.
BKEXT，BKMV16，DIVFP2， BTS，BTR
* For details, refer to Chapter 3 High-level Instructions.
RS，WS，RK，WK
* For details, refer to Chapter 5 MEWTOCOL-COM.
2. The following functions have been added to the Ethernet function.
Multi connection server
function
Using this function, multiple devices can be connected to the same
communication port.
For example, this function can be used for the following slave
communications;
MODBUS-TCP (Port number 502)
MC protocol (Port number 5000)
MEWTOCOL-COM or MEWTOCOL7-COM
* For details, refer to 6 Multi Connection Server Function.
To Next Page
Loading...
Need help?
General
