Panasonic GTWIN - Clear Memory

GT Panel System Menu
GTWIN Reference Manual
62
2.3 Clear Memory
Clear SRAM
Clearing the SRAM will initialize:
 line graphs
 PLC device hold data
 alarm history
 internal GT device data
Clear FROM
Clearing the FROM will initialize:
 screen data
 configuration settings saved in the main unit's memory
Copy GT
You can copy the firmware and screen data from an RS232C type GT unit (only!) to an
RS232C/RS422 type GT unit of the same model series. Connect the COM port of the source
GT to the Tool port of the target GT.
NOTICE
Loss of data
If the GT units are not connected correctly, the source unit's screen
data will be deleted!