Panasonic HC-V270PP - 6 Service Mode Overview; Service Mode Menu Functions

16
6 Service Mode
Indication method of the service menu
1. Keep pressing the “Power” button, “Zoom lever” to W side and “Recording/Playback” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service mode menu.
2. End method of the top screen of the service mode menu
Touch the [ EXIT ] of LCD to end the service mode, and then POWER OFF.
Screen display Contents Function
1 Factory settings Function to throw a product up in a factory shipment state.
2 Model/Destination settings Change the Model/Destination.
(Selectable models and destinations are displayed.)
4 Lock search history indication Display the camera system error cord for three histories saved in
EEPROM.
5 Power ON self check result display Power ON self check (function to diagnose correct function of the
device and interface between devices) result display.
14 Adjutment function for the service The service adjustment do setup and adjustment of the following
items required in the field service.
15 Restore the backed up adjustment data Restore the adjustment data to new or repaired Main P.C.B. from
SD card that the data backed up from original Main P.C.B. before
repairs or replacement.
16 Touch panel calibration Calibrate the touch positions of the touch panel.
17 NFC initialization
(HC-V270 only)
Performs the Initialization of the NFC chip and erase the settings
like as Wi-Fi connection etc..