Panasonic HC-V270PP - Default Chapter; Table of Contents

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure. 1) --------3
2Warning--------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------4
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------4
2.3. Caution for AC Cord (For EB/GC) ---------------------5
2.4. How to Replace the Lithium Battery-------------------6
3 Service Navigation------------------------------------------------7
3.1. Introduction --------------------------------------------------7
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------7
3.3. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------8
3.4. Formatting----------------------------------------------------9
3.5. Baking of replacement IC and defective P.C.B.
---------------------------------------------------------------- 10
4 Specifications ---------------------------------------------------- 11
5 Location of Controls and Components------------------ 13
6 Service Mode ----------------------------------------------------- 16
6.1. Model/Destination Settings ---------------------------- 17
6.2. Lock Search and Error History Indication ---------- 18
6.3. Power ON Self Check Result Display--------------- 19
6.4. Adjustment function for the Service ----------------- 20
6.5. Restore the backed up adjustment data------------ 21
6.6. Touch Panel Calibration -------------------------------- 22
6.7. NFC Initialization (HC-V270 only)-------------------- 22
7 Service Fixture & Tools --------------------------------------- 23
7.1. Service Fixture and Tools ------------------------------ 23
7.2. When Replacing the Main P.C.B. -------------------- 23
7.3. Service Position ------------------------------------------ 23
8 Disassembly and Assembly Instructions --------------- 24
8.1. Disassembly Flow Chart for the Unit ---------------- 24
8.2. PCB Location---------------------------------------------- 25
8.3. Disassembly Procedure for the Unit ---------------- 26
9 Measurements and Adjustments -------------------------- 43
9.1. Electric Adjustment -------------------------------------- 43
10 Factory Setting--------------------------------------------------- 55
10.1. How To Turn On The Factory Settings? ------------ 55
10.2. What Is The Factory Settings? ----------------------- 56
11 Block Diagram --------------------------------------------------- 57
11.1. Overall Block Diagram ---------------------------------- 57
11.2. Camera/System Control Circuit Block
Diagram----------------------------------------------------- 58
11.3. Video/Audio Signal Process(1) Circuit Block
Diagram----------------------------------------------------- 59
11.4. Video/Audio Signal Process(2) Circuit Block
Diagram----------------------------------------------------- 60
11.5. Lens Drive Circuit Block Diagram-------------------- 61
11.6. Power Supply Circuit Block Diagram---------------- 62
12 Wiring Connection Diagram --------------------------------- 63
12.1. Interconnection Diagram ------------------------------- 63