47
9.1.3. Adjustment Procedure
All adjustments except “Touch Panel Calibration”, “Factory Setting” and “NFC Initialization” performs using “14 Adjustment function
for the service” in service mode menu.
“Touch Panel Calibration” is performed using 16 of service mode menu and “Factory Setting” is performed using 1, “NFC Initializa-
tion” is performed using 17 of service mode menu. Refer to “6 Service mode” and “10 Factory Setting”.
[Execute adjustment function for service]
1. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “Recording/Playback” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
2. Touch the twice then touch the [14] of LCD.
3. Touch the [YES] of LCD.
To Next Page
Loading...
