What to do if the SD card is inserted in another device and it is not recognised?
If an SD card from your Panasonic Camcorder isn't recognized in another device, ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) that you inserted.
Why is my Panasonic HC-V730 turning off automatically?
Your Panasonic Camcorder might be turning off automatically because of the VIERA Link feature. This happens when the unit turns off when you turn off the power to the TV using the TV remote control. If you are not using VIERA Link, set [VIERA Link] to [OFF].
How to fix incorrect remaining battery indication on my Panasonic HC-V730?
The remaining battery capacity indication is an approximation. If the remaining battery capacity indication on your Panasonic Camcorder is not displayed correctly, fully charge the battery, discharge it, and then charge it again.
Why Panasonic Camcorder images/sounds are not output to TV?
If your Panasonic Camcorder is correctly connected to a TV but you're not getting any images or sound, consult your TV's operating instructions to select the channel that corresponds to the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is output from the TV and sound levels should be adjusted on the TV, not the camcorder.
What to do if Panasonic HC-V730 is not detected by PC via USB?
If your Panasonic Camcorder is not detected by your PC when connected via USB cable, re-insert the SD card into the unit and reconnect the supplied USB cable. You may also try a different USB terminal on your PC. Also, ensure you check the operating environment. Restarting both the PC and the camcorder before reconnecting the USB cable can also help.
Why are images or sounds not output even when my Panasonic HC-V730 Camcorder is correctly connected to a TV?
If you're not getting images or sounds from your Panasonic Camcorder when connected to a TV, make sure you've selected the correct channel on your TV that matches the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is not output from the camcorder itself, so adjust the sound on the TV.
General| Sensor Type | MOS |
|---|---|
| Optical Zoom | 20x |
| Focal Length | 4.08 - 81.6 mm |
| Display | LCD |
| LCD Screen Resolution | 460, 800 dots |
| Video Resolution | 1920 x 1080 |
| Image Stabilization | Optical |
| Storage Media | SD/SDHC/SDXC Memory Card |
| Built-in Wi-Fi | Yes |
| Internal Memory | No |
| Touchscreen | Yes |
| HDMI Output | Yes |
| USB Port | Yes |
| Battery Type | Lithium-ion |
| Sensor Size | 1/2.3 inch |
| Effective Megapixels | 6.03 MP |
| Effective Pixels | 6.03 MP |
| Image Sensor | 1/2.3-inch MOS |
| LCD Screen Size | 3.0 inch |
| Video Recording Format | AVCHD, MP4 |
| Frame Rate | 50p |
| Microphone | Stereo |
| Speaker | Built-in |
Explains AVCHD, MP4, and iFrame recording formats.
Instructions for managing the built-in memory storage.
Panasonic's disclaimer regarding content loss and unit handling.
Guidance on preventing and dealing with condensation on the lens or LCD.
Details on supported SD, SDHC, and SDXC memory card types.
Explains symbols and references used throughout the operating instructions.
Identifies and describes the main buttons, terminals, and components of the camera.
Covers battery usage, charging the unit, and charging times.
Details on SD cards, insertion, and formatting.
Instructions on turning the unit on/off and switching between recording/playback modes.
Guidance on basic camera positioning and motion picture recording.
Steps to choose between SD card and built-in memory for recording.
Detailed steps for starting, pausing, and stopping motion picture recording.
Instructions for capturing still images using the camera.
Details on operating the zoom lever and zoom ratio.
Function to automatically correct horizontal tilt during recording.
How to use the secondary camera for simultaneous recording.
Explains various recording modes like Intelligent Auto, Scene Mode, and Manual.
Basic playback controls using operation icons and direct playback.
How to extract still images from recorded motion pictures.
Steps for removing unwanted recorded content.
Explains dividing scenes for AVCHD and MP4/iFrame formats.
Copying data between SD card, built-in memory, and USB HDD.
Instructions for connecting and using a USB HDD for storage.
Methods for dubbing content to Blu-ray recorders or video devices.
Instructions for using Eye-Fi cards for wireless transfer.
General information and precautions for using the Wi-Fi feature.
Using the 'Image App' for remote camera control.
Using the unit as a baby monitor with smartphone notifications.
Monitoring the recording screen remotely via smartphone.
Playing back content on a DLNA-compatible TV via Wi-Fi.
Transferring recorded files to a computer wirelessly.
Broadcasting live video via USTREAM and LUMIX CLUB.
Steps to download and install the required smartphone application.
Connecting the unit to wireless access points or smartphones.
Step-by-step guide to connect to a wireless access point.
Methods for establishing a direct connection with a smartphone.
Manual connection to a Wi-Fi network using SSID and password.
Information about the PC software for managing recorded data.
Steps for installing the HD Writer AE 5.1 software on a computer.
How to establish a connection between the camera and a PC via USB.
Instructions for copying files to a Mac using the USB cable.
Solutions for common problems encountered with the camera.
Important guidelines for safe and proper use of the unit.
Instructions for handling battery care and unit disposal.
Information about available optional accessories for the camera.
Details on using the optional remote pan tilt cradle accessory.
Configuration options for the remote pan tilt cradle.
Precautions and procedures for handling and disposing of SD cards.
Information regarding personal data stored on the unit and privacy.
To Next Page
