To Next PageTo Next PageWhy can't I see the images on TV from my Panasonic HC-V770 Camcorder?
If you can't see images from your Panasonic Camcorder on the TV, or the images are squeezed, select the correct channel on your TV that corresponds to the input used for the connection. Also, adjust the [TV ASPECT] setting to match the TV's aspect ratio and change the unit's settings depending on the type of cable used for connection.
What to do if my Panasonic HC-V770 Camcorder is not operating normally?
If your Panasonic Camcorder is on but not responding, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. After another minute, power the unit on again. Note that doing this while the media is being accessed could damage the data. If the issue persists, disconnect the power and consult the dealer from whom you purchased the camcorder.
What to do if my Panasonic HC-V770 is not detected by other devices when connected by the USB cable?
If your Panasonic Camcorder is not being detected by other devices when connected via USB cable, and you are only using the battery, try reconnecting it using the AC adapter.
Why are images or sounds not output even when my Panasonic HC-V770 is connected to the TV by the HDMI micro cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI, ensure the HDMI micro cable is correctly and fully inserted.
Why are images or sounds not output even when my Panasonic Camcorder is correctly connected to a TV?
If you're not getting images or sound when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct input channel. Adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. Note that during playback, audio is output from the TV, not the camcorder; adjust the sound on the TV.
What to do if my Panasonic HC-V770 Camcorder is not detected by the PC when connected by USB cable?
If your Panasonic Camcorder is not being detected by your PC when connected via USB, try the following: Re-insert the SD card into the unit, then reconnect the USB cable. Try a different USB port on your PC. Ensure your operating environment is compatible. Restart your PC and the camcorder, then reconnect the USB cable.
Why is there no image or sound when my Panasonic HC-V770 Camcorder is connected to the TV?
If your Panasonic Camcorder is connected to a TV but you're not getting any images or sound, first consult your TV's operating instructions to select the correct input channel. If the images appear squeezed horizontally, adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. Note that during playback, sound levels are controlled by the TV, not the camcorder.
How to fix a Panasonic Camcorder that won't turn on or has short battery life?
If your Panasonic Camcorder doesn't turn on, doesn't stay on long, or the battery drains quickly, ensure the battery is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if it still drains quickly after a full charge, it likely needs replacing.
What to do if my Panasonic HC-V770 Camcorder images or sounds are not output even when correctly connected to a TV?
If images or sounds are not output when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct channel that matches the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is not output from the camcorder, so adjust the sound on the TV itself.
What to do if my Panasonic HC-V770 Camcorder is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
General| Sensor type | MOS BSI |
|---|---|
| Total megapixels | 12.76 MP |
| Optical sensor size | 1/2.3 \ |
| Effective megapixels (image) | 6.03 MP |
| Filter size | 49 mm |
| Digital zoom | 1500 x |
| Optical zoom | 20 x |
| Image stabilizer | Yes |
| Focal length range | 4.08 - 81.6 mm |
| Interchangeable lens | - |
| Image stabilizer type | Hybrid Image Stabilization (HIS) |
| Maximum aperture number | 3.6 |
| Minimum aperture number | 1.8 |
| Focal length (35mm film equivalent) | 29.5 - 612 mm |
| Camera file system | DCF, Exif 2.2 |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Focus adjustment | Auto/Manual |
| Shoe mounting point type | Cold shoe |
| Camera shutter speed | 1/2 - 1/8000 s |
| Shutter speed (photo) | 1/2 - 1/2000 s |
| Shutter speed (video) | 1/25 - 1/8000 s |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 460800 pixels |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 1 lx |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), ENG, PER, THA |
| Product color | Black |
| Video resolutions | 960 x 540, 1280 x 720, 1920 x 1080, 3840 x 2160 pixels |
| Maximum frame rate | 50 fps |
| Supported video modes | 1080p, 2160p, 540p, 720p |
| Video formats supported | AVCHD, H.264, MP4 |
| Maximum video resolution | 1920 x 1080 pixels |
| Bitrate at maximum video resolution | 72 Mbit/s |
| Image formats supported | JPG |
| Maximum image resolution | 6528 x 3672 pixels |
| Still image resolution(s) | 6528 x 3672, 4736 x 2664, 1920 x 1080, 5472 x 3648, 3984 x 2656, 1728 x 1152, 4896 x 3672, 3264 x 2448, 640 x 480 |
| Audio system | Dolby Digital 2.0/5.1 |
| Audio formats supported | AAC |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) out | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Battery voltage | 3.6 V |
| Battery capacity | 1940 mAh |
| Video recording time | 1 h |
| Cables included | DC, HDMI, USB |
| Bundled software | HD Writer AE 5.2 |
Weight and Dimensions| Depth | 139 mm |
|---|---|
| Width | 65 mm |
| Height | 73 mm |
| Weight | 353 g |
Guidelines for using built-in memory, including data backup and access lamp indication.
Explains condensation causes and prevention methods for the lens or LCD.
Details on compatible SD card types and specifications.
Clarifies abbreviations and symbols used throughout the operating instructions.
Identifies and explains the main physical components of the camera.
Information on compatible batteries and how to insert/remove them.
Methods for powering the unit on and off using the power button or LCD monitor.
Steps to set the camera's internal clock and world time.
Steps to start, pause, and stop motion picture recording, including screen indications.
How to take still pictures in Still Picture Recording Mode, including focus indication.
Steps for selecting media and formats to play back recorded content.
Using the sub camera to record two images simultaneously.
Guide to switching between different recording modes like Intelligent Auto, Manual, etc.
Details on using the Wi-Fi function for various remote operations and transfers.
Instructions for setting up Wi-Fi connections via access points or direct smartphone connections.
How to use the unit as a wireless sub camera via Wi-Fi.
Overview of PC connectivity and software usage for data management.
Provides solutions for common problems encountered during operation.
Important safety and usage precautions to prevent damage or malfunction.
