Panasonic HC-W570 - Changing and Adjusting the Settings of the Sub Camera and the Sub Window

- 44 -
≥ The following functions do not work when the Sub Window is displayed:
j Touch Shutter
j Creative Control
j [FACE FRAMING]
j AF/AE tracking
j Optical Image Stabilizer Lock
≥ Recording menu items, operation icons, and functions such as Image Stabilizer, Level Shot
Function and
[ QUICK POWER ON ] work only for the Main Camera. For information on the
settings for the Sub Camera, refer to page 45.
≥ When you record still pictures by using the Twin Camera function, it may take longer than usual to
achieve focus. (l 24)
≥ The Sub Camera does not work when you are using the following functions:
j Stop Motion Animation Assist Mode
≥ The Fade function’s image effects do not affect the Sub Window.
Changing and adjusting the settings of the Sub
Camera and the Sub Window
1 Touch Sub Window.
2 Touch to select the size you want to use.
≥ If you do not touch the Sub Window or perform any touch operation for a while, the Sub Window
size will change.
≥ The available Sub Window sizes differ as shown below.
j In Motion Picture Recording Mode or when [PICTURE SIZE] in Still Picture Recording Mode is
set to [ 10M] or [ 2.1M] :
Changing the size of the Sub Window
Aspect ratio 16:9 1:1 16:9
Size
16:9
16:9