Panasonic HC-WXF995M - User Manual

Other manuals for Panasonic HC-WXF995M

Questions and Answers:

D
Debra PerezSep 6, 2025
Why Panasonic HC-WXF995M has no sound or picture on TV?
- J
  jennifercrossSep 6, 2025
  If your Panasonic Camcorder is correctly connected to a TV, but you are not getting images or sounds, or the images are squeezed horizontally: * Refer to your TV's operating instructions and select the channel that matches the input used for the connection. * Change the [TV ASPECT] setting to match the aspect ratio of your TV. * Note: Audio during playback mode is not output from the unit when connected to a TV.
B
Brian YuAug 22, 2025
How to fix a Panasonic HC-WXF995M that won't turn on?
- T
  Tammy HardingAug 22, 2025
  If your Panasonic Camcorder isn't turning on, ensure the battery is fully charged. In cold environments, battery life can be shorter. If the operating time remains short even after a full charge, the battery may be worn out and require replacement.
D
Darius SuttonSep 4, 2025
What to do if Panasonic HC-WXF995M Camcorder doesn't recognize SD card?
- J
  John Cooper Jr.Sep 4, 2025
  If the SD card inserted in your Panasonic Camcorder is not recognized, it may be because the SD card was formatted on a PC. Use this unit to format SD cards.
A
Ashley ShermanSep 2, 2025
Why does my Panasonic HC-WXF995M Camcorder stop recording suddenly?
- T
  Travis LoweSep 2, 2025
  If your Panasonic Camcorder arbitrarily stops recording, it may be due to the following reasons: * The recordable time may have shortened because of the data writing speed deterioration or repeated recording and deletion. Use an SD card that can be used for motion picture recording. * Format the SD card or built-in memory using the unit. * If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
J
Jason ScottSep 1, 2025
What to do if Panasonic HC-WXF995M Camcorder displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN'?
- M
  Monica BlackwellSep 1, 2025
  If you see the message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” on your Panasonic Camcorder, it means the unit has automatically detected an error. You should restart the unit by turning it off and on again. Note that the unit will turn off in about 1 minute if it is not turned off and on. If the error message repeatedly appears even after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
V
vstanleyAug 30, 2025
Why does the color or brightness change on my Panasonic HC-WXF995M Camcorder, or why do I see horizontal bars?
- D
  Daniel HaleAug 30, 2025
  Color or brightness changes and horizontal bars may appear when recording under fluorescent, mercury, or sodium light. This is not a malfunction. In Motion Picture Recording Mode, use Intelligent Auto Mode/Intelligent Auto Plus Mode, or adjust the shutter speed. In FULL HD Slow Motion Mode or Slow & Quick Video Mode, setting the shutter speed to 1/100 seconds may reduce the problem.
C
Charles ClarkeAug 29, 2025
What to do if my Panasonic HC-WXF995M displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
- C
  Carl RodriguezAug 29, 2025
  This message indicates that the camcorder has detected an error. Try restarting the unit by turning it off and then on again. If the error message continues to appear, the unit may require repair.
M
michellevaldezAug 27, 2025
What to do if Panasonic HC-WXF995M is on but not working?
- K
  Katie ScottAug 28, 2025
  If your Panasonic Camcorder unit cannot be operated even though it is turned on, or it does not operate normally: * Remove the battery or AC adapter, wait about 1 minute, and then reconnect it. * Wait another minute, then turn the unit on again. * If normal operation is still not restored, disconnect the power and consult the dealer from whom you purchased the unit.
D
David MorenoAug 27, 2025
What to do if my Panasonic Camcorder is on but not operating normally?
- M
  mathewhaynesAug 27, 2025
  If your Panasonic Camcorder is on but not functioning correctly, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit back on. If this doesn't restore normal operation, the unit may require repair.
J
John RodriguezAug 25, 2025
What to do if Panasonic Camcorder is not detected by PC via USB?
- E
  Eduardo McbrideAug 25, 2025
  If your Panasonic Camcorder is not detected by the PC when connected by the USB cable: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Check the operating environment of your PC. * Restart your PC and the camcorder, then reconnect the USB cable.