EasyManua.ls Logo

Panasonic HC-X1 - Setting the External Output Resolution

Panasonic HC-X1
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 128 -
This item is set to [OFF] in the following situations when this unit is in Recording Mode:
j When [REC FORMAT] is set to a setting with a size of 4K (4096k2160) or UHD (3840k2160)
(l 161)
j During auto recording (l 98, 188)
Setting the external output resolution
Change the setting for outputting images to an external monitor or other external device (recorder,
etc.).
Select the [RESOLUTION] menu.
[SYSTEM] automatically sets the output resolution according to the setting in [REC FORMAT].
If the images are not output on the external device when the setting is [SYSTEM], switch to the
method [1080p], [1080i] or [DOWN CONV.] which enables the images to be displayed on your
external device. (Please read the operating instructions for the external device.)
[DOWN CONV.] outputs images in standard picture quality.
To connect with an AV cable (commercially-available), select [DOWN CONV.].
To use an AV cable for external output
1 Select the [AV OUT] menu.
2 Select the [RESOLUTION] menu.
Images may not be displayed on the external device for several seconds in some cases, such as
when changing between scenes.
When this unit and an external monitor are connected with an AV cable,
scenes with a [REC FORMAT] size of 4K (4096k2160) are not output.
If the size in [REC FORMAT] is set to 4K (4096k2160), [RESOLUTION] cannot be set to [1080i]
or [DOWN CONV.]. If the size in [REC FORMAT] is set to a different value and [RESOLUTION] is
set to [1080i] or [DOWN CONV.]. the [RESOLUTION] setting will change to [SYSTEM].
When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i], [RESOLUTION] is fixed to
[SYSTEM].
[RESOLUTION] cannot be set during Freeze Frame. (l 89)
In the following cases, the video and audio are not output from VIDEO OUT terminal and AUDIO
OUT terminal:
j When an HDMI cable is connected to this unit
j When [RESOLUTION] is set to the settings other than [DOWN CONV.] (excluding when
[REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i])
: [OUTPUT SETUP] # [RESOLUTION] # desired setting
[SYSTEM]/[1080p]/[1080i]/[DOWN CONV.]
: [OUTPUT SETUP] # [AV OUT] # [ON]
: [OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.]
MENU
MENU
MENU
HC-X1_GD_DVQP1183ZA_eng.book 128 ページ 2016年11月28日 月曜日 午前11時44分

Table of Contents

Related product manuals