- 157 -
≥ By default the following values are set for [F1:] in [FILE SELECT]
j SAT: “0”
j PHASE: “0”
Adjustment of black level based on the image is performed.
1 Touch [MASTER PED].
2 Touch / to adjust the black level.
≥ You can select a value between s150 and r150.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
Tone or contrast of the image is set in accordance with the recorded scenes.
1 Touch [GAMMA MODE].
2 Touch / to select the setting item.
3 Touch [EXIT] to exit the menu screen.
≥ When [CINE-LIKE V] or [CINE-LIKE D] is selected, we recommend that you set the lens aperture
to a level lower than the normal lens iris level (approximately 1/2) to fully utilize the feature of the
selected setting.
This sets the gamma curve of dark areas.
1 Touch [BLACK GAMMA].
2 Touch / to adjust settings.
≥ You can select a value between s8 and r8.
≥ Making adjustments in the – direction compresses dark areas, while making adjustments in the +
direction expands them.
3 Touch [EXIT] to complete the setting.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
[MASTER PED]
[GAMMA MODE]
[HD]: This is the video gamma feature for HD (High Definition).
[SD]: This increases gain in darker areas more than [HD] does.
[FILMLIKE1]: This feature reproduces highlight areas more than [HD] does.
[FILMLIKE2]: This feature reproduces highlight areas more than [FILMLIKE1] does.
[FILMLIKE3]: This feature reproduces highlight areas more than [FILMLIKE2] does.
[CINE-LIKE V]: This gamma feature creates cinematic images with sharper contrast.
[CINE-LIKE D]: This gamma feature creates cinematic images.
[STILL-LIKE]: Expresses colors in a picture tone similar to that produced with a digital
still camera.
[BLACK GAMMA]
HC-X1_GD_DVQP1183ZA_eng.book 157 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
