Panasonic HC-X1 - Zoom Display; Date Format

- 193 -
This changes the units of focus values.
This changes the units of zoom values.
The information displayed on the screen (operation icon and counter display etc.) can be displayed/
not displayed on the external monitor. (l 127)
It is possible to change the date and time display mode.
It is possible to change the date format.
This function displays the horizontal/vertical tilt of the unit with the electronic level. (l 93)
[FOCUS DISPLAY]
[NUMBER] A value between 0 and 99 is displayed.
[feet] All values are displayed in feet.
[m] All values are displayed in meter.
[OFF] No value is displayed.
[ZOOM DISPLAY]
[NUMBER] A value between 0 and 99 is displayed.
[mm] All values are displayed in millimeter.
[OFF] No value is displayed.
[VIDEO OUT OSD]
[ON]/[OFF]
[DATE/TIME]
[OFF]/[TIME]/[DATE]/[DATE&TIME]
[DATE FORMAT]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[LEVEL GAUGE]
[ON]/[OFF]
HC-X1_GD_DVQP1183ZA_eng.book 193 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分