- 184 -
This changes the color in which images are recorded in Infrared Recording Mode.
You can register a focus position to Focus Transition. (l 60)
≥ Switch to Manual Focus. (l 52)
You can set the length of time in which the focus will shift during Focus Transition. (l 62)
≥ This function’s default setting is 2 seconds.
You can start recording and Focus Transition simultaneously. (l 62)
You can set the length of time before Focus Transition starts. (l 62)
You can stamp the date and time of recording on the images you record.
≥ appears on the screen.
≥ The display mode and format of the date and time of recording to be stamped vary depending on
the settings for [DATE/TIME] and [DATE FORMAT]. (l 193)
≥ The month of the date and time of recording is recorded in English.
[IR REC COLOR]
[Green]/[White]
[FOCUS TRANSITION]
[SET]/[OFF]
[FOCUS TRANSITION TIME]
[DIRECT]/[FASTEST]/[2-15 SEC.]/[20 SEC.]/[30 SEC.]/[45 SEC.]/[60 SEC.]/[90 SEC.]
[FOCUS TRANSITION REC]
[1]/[2]/[3]/[OFF]
[FOCUS TRANSITION WAIT]
[0 SEC.]/[5 SEC.]/[10 SEC.]
[TIME STAMP]
[ON]/[OFF]
HC-X1_GD_DVQP1183ZA_eng.book 184 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
