- 183 -
This enables/disables Variable Frame Rate Mode.
In Variable Frame Rate Mode, you can record quick or slow motion picture by changing the frame
rate before recording.
≥ For information on how to use Variable Frame Rate Mode, refer to page 100.
You can adjust the frame rate for Variable Frame Rate Mode.
≥ Set [VFR MODE] to [ON]. (l 100, 183)
1 Touch [FRAME RATE].
2 Touch / to adjust the frame rate.
≥ You can select a value between 2 fps and 60 fps or 2 fps and 50 fps.
3 Touch [EXIT] to complete the setting.
≥ The default setting varies depending on the [REC FORMAT] setting.
j [FHD 1080/29.97p 50M]: “30fps”.
j [FHD 1080/23.98p 50M]: “24fps”.
j [FHD 1080/25.00p 50M]: “25fps”.
≥ When [REC MODE] and [REC FORMAT] are set to settings that are not available for Variable
Frame Rate Mode, [FRAME RATE] cannot be set. (l 100)
This enables/disables Super Slow Recording. (l 103
)
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation. (l 95)
Selecting [ON] enables Infrared Recording Mode, allowing you to record images in the dark. (l 92)
[VFR MODE]
[ON]/[OFF]
[FRAME RATE]
[SUPER SLOW REC]
[ON]/[OFF]
[PRE-REC]
[ON]/[OFF]
[INFRARED REC]
[ON]/[OFF]
HC-X1_GD_DVQP1183ZA_eng.book 183 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
