Panasonic HC-X1 - Counter Display; Setting the Time Code

- 78 -
You can change a counter display that indicates how much time has elapsed during recording or
playback.
Press the COUNTER button to switch the counter display.
≥ The display will be switched in the following order: Time Code # User Information* # Recording
Counter # Off.
* This is displayed only when [REC MODE] is set to [AVCHD]. (l 160)
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥ The number of frames (frame count per second) varies depending on the frame rate in
[REC FORMAT]. (l 161)
Recording
Counter display
A COUNTER button
B RESET button
Counter display Indications
Time Code TC 00:00:00:00 or TC 00:00:00.00
≥ Display will change depending on the setting of the
[DF MODE]. (l 79)
User Information* (l 80) UB 00 00 00 00
Recording Counter (l 81) (In Recording Mode)
0:00:00 or SCN 0:00:00
(In Playback Mode)
SCN 0:00:00
≥ In Recording Mode, display will change depending on the
setting of the [REC COUNTER].
≥ In Playback Mode, display will return to SCN 0:00:00 for
each scene.
Frame rates Frame
59.94p/59.94i/29.97p 0 to 29
50.00p/50.00i/25.00p 0 to 24
23.98p/24.00p 0 to 23
COUNTER
RESET


HC-X1_GD_DVQP1183ZA_eng.book 78 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分