- 173 -
This enables/disables the Wave Form Monitor function. (l 95)
This sets the type of Wave Form Monitor. (l 96)
This sets the display positions of Wave Form Monitor. (l 96)
Switch between the zebra display and marker display.
* Not displayed when [ZEBRA DETECT 2]/[MARKER] is set to [
OFF]. (l 191)
≥ For information on the zebra display and marker display, refer to page 97.
This sets the display duration of the zebra display.
You can switch the type of color bars to be displayed when you press the BARS button. (l 106)
[WFM]
[ON]/[OFF]
[WFM TYPE]
[WAVE]/[VECTOR]/[WAVE/VECTOR]
[WFM POSITION]
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
[ZEBRA]
[ZEBRA 1]/[ZEBRA 2]*/[MARKER]*/[OFF]
[ZEBRA MODE]
[CONTINUE]: Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]: Displays the zebra display for approximately 5 seconds.
[BARS TYPE]
[TYPE 1] [TYPE 2] [TYPE 3]
HC-X1_GD_DVQP1183ZA_eng.book 173 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
