- 96 -
∫
To change the type of WFM
Select the menu.
≥ This function is not available in the following cases:
j When using Focus Assist (l 56)
j During Freeze Frame (l 89)
j When color bars are displayed (l 106)
∫ To change the display position of WFM
Select the menu.
≥
You can also change the waveform position to the upper left, upper right, bottom left or bottom
right by performing one of the following operations while a waveform is displayed:
j Rotating the jog dial
j Sliding the waveform while touching it.
≥ Register [FAST ZOOM] to a USER button. (l 82)
You can use Fast Zoom when operating the zoom with the zoom lever. (l 49)
≥ Register [EVF ON/OFF] to a USER button. (l 82)
This forces the viewfinder to turn on/off.
≥ After the viewfinder turns on, if the eye sensor detects your eye when it is moved closer to the eye
cup of the viewfinder the [EVF ON/OFF] setting will be canceled.
≥ When the [LCD/EVF OUTPUT] is set to [LCD], this item cannot be set. (l 32)
: [SW SETUP] # [WFM TYPE] # desired setting
[WAVE]: Displays waveforms as waves.
[VECTOR]: Displays waveforms as vectors.
[WAVE/VECTOR]: Switches the setting each time the applicable USER button is pressed.
: [SW SETUP] # [WFM POSITION] # desired setting
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
[FAST ZOOM]
[EVF ON/OFF]
HC-X1_GD_DVQP1183ZA_eng.book 96 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
