- 49 -
When [i.Zoom] is set to [ON], you can zoom in while maintaining the beauty of high-definition picture
quality up to a magnification of approx. 30k.
≥ Set [REC FORMAT] to a setting with a picture size of 1920k1080 or below. (l 161)
Select the menu.
≥ You can also use i.Zoom by registering [i.ZOOM] to a USER button. (l 102)
≥ The zoom magnification display will change.
(Example)
j iZ00 to iZ99: magnification levels that fall in the optical zoom range
j Z99: i.Zoom
≥ This function is not available in the following cases:
j During Super Slow Recording (l 103)
j In Variable Frame Rate Mode (l 100)
j When the size in [REC FORMAT] is set to 4K (4096k2160) or UHD (3840k2160)
j During Freeze Frame (l 89)
When [FAST ZOOM] is set to [ON], you can use Fast Zoom while operating the zoom with the zoom
lever.
1 Select the menu.
2 Push the zoom lever fully to operate the zoom.
≥ The zoom magnification display changes when using Fast Zoom. (Example: 99)
∫ About the zoom speed
≥ The zoom speed will vary depending on how far the zoom lever is pressed or how fast the zoom
ring is rotated.
≥ The zoom operation using the sub zoom lever will be performed at a constant speed. Zoom
speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM]. (l 174)
≥ You can also use Fast Zoom by registering [FAST ZOOM] to a USER button. (l 82)
≥ The sound of the zoom mechanism becomes louder than usual during fast zoom operation. This
may cause the sound to be recorded during recording.
≥ Depending on the subject, Auto Focus may not track it when Fast Zoom is in use.
Utilizing the USER button
Digital Zoom can be used by registering [D.ZOOM] to a USER button. (l 87)
≥ Please refer to page 82 for details about setting the USER button.
Using the i.Zoom
: [SW SETUP] # [i.Zoom] # [ON]
Using Fast Zoom
: [SW SETUP] # [FAST ZOOM] # [ON]
HC-X1_GD_DVQP1183ZA_eng.book 49 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
