- 179 -
∫ Background recording
You can continue recording a motion picture by recording it on the SD card that is not set as a
recording destination in [MEDIA SELECT] (l 41).
≥ When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT],
[SD CARD 2] will be used for background recording. The following instructions assume that the
recording destination of motion pictures is set to [SD CARD 1].
≥ is displayed beside the SD card display for card 2.
How to use background recording
≥ Register [BACKGROUND] to a USER button. (l 82)
1 Press the recording start/stop button to start recording.
≥ A motion picture will start being recorded to the two SD cards. ( will be displayed in red.)
≥ If you press the USER button to which [BACKGROUND] is registered, you can start recording
only to the SD card in card slot 2.
≥ For information on how to register a function to USER buttons, refer to page 82. For information
on how to use the USER button to which [BACKGROUND] is registered, refer to page 93.
2 Press the recording start/stop button again to stop recording.
≥ Recording to the SD card in card slot 1 will stop, but recording to the SD card in card slot 2 will
continue.
≥ You can repeat recording to the SD card in card slot 1 by pressing the recording start/stop button.
≥ You can stop background recording by pressing and holding the USER button to which
[BACKGROUND] is registered.
1 Slot 1
2 Slot 2
3 Press the recording start/stop button.
4 Press and hold the USER button to which
[BACKGROUND] is registered.
5 Recording is started
6 Recording is paused
A Recording
BACKGR
HC-X1_GD_DVQP1183ZA_eng.book 179 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
