- 68 -
You can customize Auto Iris motion settings for various recording conditions by adjusting the
settings of [AUTO IRIS LEVEL] and [AUTO IRIS LEVEL EFFECT] individually.
∫ Adjusting brightness during the Auto Iris Mode
1 Select the [AUTO IRIS LEVEL EFFECT] menu.
2 Touch / to adjust settings.
≥ You can select a value between s50 and r50.
≥ Touch [EXIT].
3 Select the [AUTO IRIS LEVEL] menu.
≥ If you select [OFF], the [AUTO IRIS LEVEL EFFECT] setting will not be applied.
4 Touch [EXIT] to complete the setting.
≥ You can also change the [AUTO IRIS LEVEL] setting with a USER button. (l 97)
Utilizing the USER button
It is convenient to use following functions of the USER button when it is set to Iris adjustment.
≥ Please refer to page 82 for details about setting the USER button.
Customizing Auto Iris motion settings for various recording conditions
: [SCENE FILE] # [AUTO IRIS LEVEL EFFECT]
: [SCENE FILE] # [AUTO IRIS LEVEL] # [ON]
USER button function Effect
[BACKLIGHT] (l 85) Switches to automatic iris control to compensate the
backlight. This will brighten the image on the screen to
prevent getting dark when a backlight is hitting the subject
from the back.
[SPOTLIGHT] (l 86) Switches to automatic iris control for spotlight. This will allow
to clearly record an extremely bright subject.
MENU
MENU
HC-X1_GD_DVQP1183ZA_eng.book 68 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
