- 73 -
If you press the jog dial when the shutter speed is displayed as a decimal number, the Synchro
Scan setting will be displayed. You can fine-adjust the shutter speed by adjusting the Synchro Scan
setting. This will minimize flickering and horizontal bars in images.
1 Press the SHUTTER button.
2 When the shutter is displayed as a decimal number (e.g.,
1/60.0), press the jog dial.
≥ The display on the screen will switch from [ SHUTTER] to
[ SYNCHRO], and the Synchro Scan setting will be displayed.
3 Adjust the Synchro Scan setting by rotating the jog dial.
≥ To minimize flickering and horizontal bands, look at the screen while adjusting the shutter speed.
4 Push the jog dial to set.
≥ The set shutter speed will also be applied to the [SYNCHRO SCAN] menu setting. (l 152)
Shutter speed range for the Synchro Scan setting
Depending on the size and frame rate in [REC FORMAT], the range of available shutter speeds
varies. (l 161)
Making adjustments with Synchro Scan
Frame rates Shutter speed
59.94p/59.94i 1/60.0 to 1/249.7
29.97p 1/30.0 to 1/249.7
23.98p 1/24.0 to 1/249.6
24.00p 1/24.0 to 1/249.9
50.00p/50.00i 1/50.0 to 1/250.0
25.00p 1/25.0 to 1/250.0
HC-X1_GD_DVQP1183ZA_eng.book 73 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
