- 99 -
4 Press USER button or touch USER button icon in the recording screen.
≥ This will display and send a signal to the external device instructing it to start recording.
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display and send a signal to the external
device instructing it to stop recording.
≥ Register [AF AREA] to a USER button. (l 82)
You can adjust the area width where Auto Focus works according to the size of the subject. (l 55)
1 Press USER button or touch USER button icon in the recording screen.
≥ are displayed on the screen.
2 Rotate the jog dial to adjust the AF area
frame.
3 Push the jog dial to fin
ish the adjustment.
≥ Press USER button or touch the USER button icon to cancel the setting.
≥ To adjust the AF area frame again, press the jog dial while the on-screen
icon [ AF AREA] (yellow) is displayed, and repeat Steps 2s3.
≥ For information on on-screen icons, refer to 111.
[AF AREA]
A [AF AREA]
B AF area frame
AF-AREA
HC-X1_GD_DVQP1183ZA_eng.book 99 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分
To Next Page
Loading...
