71
VQT3J95
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted
after dividing.
≥ Change the mode to , and set [VIDEO/PICTURE] of the play mode selection to
[AVCHD]. (l 36)
1 Select the menu.
2 Select the scene you wish to divide using the cursor button and
press the ENTER button.
3 Select to set the dividing point.
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 63)
≥ Select [YES] to continue dividing the same scene.
To continue dividing other scenes, select [NO] and
repeat steps 2-3.
4 Press the MENU button to complete dividing.
≥ Unwanted parts can be deleted. (l 69)
To delete all the divided points
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date exceeds 99.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
: [EDIT SCENE] # [DIVIDE] # [SET]
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
HDC-SD40&TM40P_PC_VQT3J95_mst.book 71 ページ ２０１１年１月２０日 木曜日 午前１１時４９分
To Next Page
Loading...
