Installing the Unit
About the installation location
Notice
• Do not connect the unit to a computer before installing the software.
• Do not use the unit when the humidity is high or immediately after moving it from a cold location to a
warm one. It may cause dew.
In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects,
as shown in the following illustration.
210 mm*¹
(8.3 in.)
320 mm*¹
(12.6 in.)
[Top View]
*1
Clearance required to set the feed tray and exit tray.
Operating Manual 19
Installation
To Next Page
Loading...
