J
Joann RamirezAug 5, 2025
What to do if my computer does not recognize the Panasonic KV-S7075C Scanner?
- VVickie EverettAug 5, 2025
If your Panasonic Scanner isn't being recognized by your computer, there could be several reasons: 1. Ensure the USB cable is correctly connected. 2. If you're using a USB hub, try connecting the scanner directly to the computer. 3. Try using the USB cable that came with the scanner, or a certified Hi-speed USB 2.0 cable. 4. The USB interface of the computer may not be installed correctly. Check the computer whether the USB interface of your computer is installed correctly using the device manager’s property. 5. The scanner may have entered Standby mode. Restart the scanner by pressing the Start/Stop button for more than 1 second. 6. The software may not be installed correctly. Uninstall the software from the computer, and then install the software again.