Panasonic KV-SL1066 User Manual (English)

Other manuals for Panasonic KV-SL1066

Service Manual255 pages

Troubleshooting6 pages

Questions and Answers:

C
Corey DaySep 4, 2025
Why does my Panasonic KV-SL1066 Scanner double feed frequently?
- B
  Brian BellSep 4, 2025
  Double feeding in your Panasonic Scanner can occur for several reasons. The paper feed roller or double feed prevention roller may be worn down, requiring replacement. The double feed detectors could be dirty and need cleaning. Ensure the document is properly aligned and not curled or folded, which can cause uneven height on the right and left sides. Also, make sure you aren't using unsupported or overly thick paper. If so, copy the document onto compatible paper. Finally, avoid overloading the feed tray.
D
Donald JimenezSep 3, 2025
What to do if my computer does not recognize my Panasonic Scanner?
- L
  lirobertSep 3, 2025
  If the computer doesn't recognize the Panasonic Scanner, ensure the USB cable is correctly connected directly to the computer, not through a USB hub. If the issue persists, verify you are using the included USB cable. The problem may also be caused by the software not being installed correctly. In this case, uninstall and then reinstall the software. Also, pressing the power button will turn ON the unit’s power if it was turned OFF because no operation was performed for a certain period of time.
M
Megan AllenSep 1, 2025
Why is the scanning position shifted on my Panasonic KV-SL1066?
- A
  Andrew OwensSep 1, 2025
  If the scanning position is shifted, it may be because the scanning position has not been readjusted after replacing or re-assembling the CIS assembly or mechanical parts related to conveying documents or the CIS assembly is not installed properly. Re-assemble the CIS Assembly.
S
Stephanie JimenezAug 30, 2025
What to do if START/STOP, Skip, or Cursor buttons don't work on Panasonic Scanner?
- S
  Sarah ClarkAug 30, 2025
  If the START/STOP, Skip, or Cursor buttons on your Panasonic Scanner aren't working correctly, it could be due to a mechanical problem with the ON/OFF switch. Check the contact between the button cover and the switch on the SW PANEL Board. Also, check the button’s mechanical condition. Re-attach the button cover after checking for damage. Replace any faulty parts.
M
Michelle FarrellAug 29, 2025
How to troubleshoot noise issues with my Panasonic KV-SL1066?
- E
  eallenAug 29, 2025
  To troubleshoot noise issues with your scanner, consider the following: * There may be a problem with the Conveyor Motor. Replace the Conveyor Motor if you hear a strange sound. * There may be a problem with the Bearing of the Rollers. Replace the Bearing that has the strange sound. * There may be a problem with the Rollers. Replace the Rollers that have the strange sound. * There may be a problem with the Gears. Replace the Gears that have the strange sound.
A
Alejandro ThompsonAug 28, 2025
What to do if my Panasonic KV-SL1066 does not recognize the USB connection?
- A
  Amanda TaylorAug 28, 2025
  If your scanner isn't recognizing the USB connection, here's what you can do: * Check the device (USB) condition of PC with Device Manager. * Re-attach the USB cable, and then restart the scanner and PC. * Try replacing the USB cable. For S1057C and S1027C models, check the soldering condition of parts and circuits on the CONTROL Board, including the USB IF connector, common mode filter, USB3.0 Device IC, and PCI Clock Driver. Replace the CONTROL Board if necessary. For SL1066, SL1056, SL1055, SL1036, and SL1035 models, inspect the soldering condition of parts and circuits on the CONTROL Board, focusing on the USB IF connector, common mode filter, and CPU. Replace the CONTROL Board if needed.
C
Carol MurphyAug 27, 2025
Why does my Panasonic Scanner skew documents when scanning?
- S
  Sandy UnderwoodAug 27, 2025
  The document might be skewing during scanning for several reasons: * The document guides may not be properly set according to the document size on the feed tray. Adjust the document guides to match the document size. * The mixed batch card guide might not be set correctly. Ensure the guide is properly set. * The ADF door may not be closed tightly. Close the door until it clicks into place. * The rollers could be dirty. Clean them with roller cleaning paper. * The rollers may not be properly installed after re-assembling. Check the roller attachments and re-attach them correctly. * The rollers may have reached their life expectancy. Replace the rollers after checking the configuration.
L
Larry WhiteAug 27, 2025
What to do if the LED (Green) does not light when the Panasonic KV-SL1066’s power is turned ON?
- A
  Adam BentonAug 27, 2025
  If the green LED doesn't light up when you turn on your Panasonic Scanner, the power cord might not be plugged in properly. Ensure the power plug is firmly inserted.
C
Christopher VasquezAug 25, 2025
Why is my Panasonic KV-SL1066 not recognized by the computer?
- K
  Kelsey GarciaAug 26, 2025
  There are several reasons why your Panasonic Scanner might not be recognized: - The USB cable may not be correctly connected. Ensure it is properly connected. - The software may not be installed correctly. Try uninstalling and reinstalling the software. - The scanner may be connected via a USB hub. Avoid connecting it through a USB hub. - There might be a problem with the USB cable. Use the USB cable that came with the scanner. - The scanner might have turned off due to inactivity. Press the power button to turn it back on.
T
Taylor MoralesAug 23, 2025
What to do if my Panasonic KV-SL1066 Scanner scan speed is slow?
- T
  thomasmartinezAug 23, 2025
  If your Panasonic Scanner's scan speed is slow, it might be connected via USB 1.1. Try connecting it via USB 2.0 or USB 3.0 for faster scanning.

Panasonic KV-SL1066 Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
Maximum Paper Size	A4
Scanning Speed (Color)	30 ppm
Scanning Speed (Grayscale)	30 ppm
Automatic Document Feeder Capacity	100 sheets
Scanning Speed	30 ppm
Supported Operating Systems	Windows, Mac
Duplex Scanning	Yes
Scanning Technology	CIS (Contact Image Sensor)
Connectivity	USB
Interface	USB
Duty Cycle	3000 pages/day