26
Setup
Setting your logo
1
Press .
Display:
2
Press , then .
3
Press .
4
Enter your logo, up to 30 characters, by using the
dial keypad.
Example: Bill
1. Press twice.
Cursor
2. Press six times.
3. Press six times.
4. Press to move the cursor to the next space
and press six times.
5
Press .
6
Press .
1
2 3
4
5 6
7
8 9
0
STOP
START/SET/COPY
MENU
JOG DIAL
INSERT
/
To correct a mistake
●
Press or to move the cursor to the
incorrect character, then make the correction.
To delete a character
●
Move the cursor to the character you want to delete
and press .
To insert a character
1. Press or to move the cursor to
the position to the right of where you want
to insert the character.
2. Press (One-Touch Dial key 2) to
insert a space and enter the character.
The logo can be your company, division or name.
Note:
●
You can enter your logo by rotating
(see the next page). If using
, press to move the cursor.
To Next Page
Loading...
