32
Making and Answering Calls
TONE and PAUSE buttons
TONE button
The ( ) button is used for rotary pulse dial
services and allows you to temporarily change from the
pulse to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
the pulse mode.
Entering pauses
When the button is pressed during
dialing, a pause will be inserted. Pressing
once creates a 5 second pause.
Example 1:
When your unit is connected to a host exchange, insert
a pause before the telephone number to get an outside
line.
Example 2:
If a transmission error occurs during an overseas
transmission, add two pauses at the end of the
telephone number.
9 PAUSE
Line access code
Telephone
number
International
access code
Country
code
PAUSE PAUSE
Telephone
number
Note:
●
TONE and PAUSE can be stored into a
telephone number in a One-Touch Dial
and the JOG DIAL directory.
1
2 3
4
5 6
7
8 9
0
REDIAL/PAUSE
TONE
To Next Page
Loading...
