42
Caller ID
Storing a telephone number in the One-Touch Dial
and JOG DIAL directory from the Caller ID list
You can store a name and telephone number in the One-Touch Dial and JOG DIAL directory from the Caller
ID list.
Important:
●
This feature is not available in the following cases.
— The telephone number includes data other than numbers (ie., or #).
— The telephone number information was not received.
1
Press .
Example:
Display:
2
Rotate until the name you want to
store is displayed.
Example:
3
Press .
4
a: To store in the One-Touch Dial memory:
For stations 1–3, press one of the One-Touch
Dial keys.
Example:
Press .
For stations 4–6, press , then press
one of the One-Touch Dial keys.
Example:
Press .
●
A new entry will overwrite any previous
information.
●
If you are using One-Touch Dial keys 1, 2 or 3
as the BROADCAST key (p. 59), One-Touch
Dial keys cannot be used for this feature.
●
When storing, you can only store a name up
to 10 characters long. To edit the name and
number, see the instructions on page 34.
<S06>1233453809
b: To store in the JOG DIAL directory:
Rotate .
Example:
Press .
●
If the directory is full, a name and
number cannot be stored.
●
When storing, you can only store a
name up to 10 characters long. To
edit the name and number, see the
instructions on page 37.
5
Press .
REGISTERED
Note:
●
You cannot store caller information in the
One-Touch Dial and JOG DIAL directory
if a telephone number is not displayed.
To Next Page
Loading...
