34
One-Touch Dial
To keep the telephone number
secret
Press (One-Touch Dial key 3) after
entering the telephone number in step 5.
●
A secret number can not be viewed after this
is set.
●
The telephone number will not appear on the
telephone number list.
●
Pressing does not count as a
digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 37.
Helpful hints:
●
To confirm the stored telephone numbers
and station names, print a telephone number
list (p. 116).
●
The stored names in the One-Touch Dial can
be searched for using the JOG DIAL directory.
Example:
John <S02>
Storing names and telephone numbers in
One-Touch Dial keys
The unit’s memory allows you to use a One-Touch Dial for rapid access to your most frequently dialed
numbers. 6 stations are available.
●
One-Touch Dial keys 1, 2 or 3 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys
(BROADCAST). Both functions cannot be used at the same time. For the broadcast function, see pages 59 to 61.
1
Press .
Display:
2
For stations 1–3
Press one of the One-Touch Dial keys.
Then press to go to the next prompt.
For stations 4–6
Press , then press one of the One-Touch
Dial keys.
3
Enter the station name, up to 10 characters, by
following the instructions on page 27.
Example:
4
Press .
Example:
5
Enter the telephone number up to 30 digits.
●
To enter a hyphen in a telephone number, press
(One-Touch Dial key 1).
Example:
6
Press .
●
To program other stations, repeat steps 2 to 6.
7
Press to exit the program.
Note:
●
If “DIAL MODE” is not displayed when you select station 1,
2 or 3 in step 2, the broadcast function has been set. To use
the station as a One-Touch Dial key, press to select
“DIAL MODE”. The broadcast function will be canceled.
To Next Page
