133
Checking the amount of remaining film
FILM REMAIN
113
Setting the dialing mode
DIALING MODE
#13
Summary of user programmable features
Basic features
Code
Feature & Display Available settings Meaning
Page
#01
Setting the date and time
SET DATE & TIME
(2 digits for each entry)
mm/dd/yy hh:mm 25
#02
Setting your logo
YOUR LOGO
(Up to 30 characters)
26
#03
Setting your facsimile telephone number
YOUR FAX NO.
(Up to 20 digits) 28
#10
Setting the caller’s recording time
RECORDING TIME
102
#04
Printing the sending report
SENDING REPORT
ERROR
ON
OFF
If transmission fails
Activate
Deactivate
55
AUTO
TONE
PULSE
Sets the dialing mode automatically.
Sets to TONE.
Sets to PULSE.
33
#18
Note:
●
You can display basic features in the order above by rotating instead of entering the code
number (#01, #02, etc.).
(The pre-selected setting is in bold.)
Features Summary
VOX
1 MIN
Unlimited
Deactivate
#11
Setting the remote operation ID
REMOTE TAD ID
ID=111
Any 3-digit number except a
number using digits 0 or7.
94
#06
Setting the ring count in the TAD/FAX
mode
TAD RING COUNT
1, 2, 3, 4
TOLL SAVER
RINGER OFF
1 to 4 rings
Saves you the charges for
the call.
Does not ring.
101
Setting the ring count in the FAX ONLY
mode
FAX RING COUNT
1, 2, 3, 4 1 to 4 rings 68
To Next Page
Loading...
