Panasonic KX-FT21BX - Specifications

INTRODUCTION
- 9 -
KX-FT21LA
Comment
216 mm • ~ 30 m (8
1
/
2
"• ~98') roll,with 25 mm (1") core
** Transmission speed depends upon the contents of the pages, resolution,
telephone line conditions and capability of the other party’s machine.
** The 15 second speed is based upon the CCITT No. 1 Test Chart.
Note:
Any details given in these instructions are subject to change without notice.
The pictures and illustrations in these instructions may vary slightly from the actual product.
Parts No.
KX-A106
Description
Standard thermal recording paper
OPTIONAL ACCESSORIES
SPECIFICATIONS
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm (8
1
/
2
”) in width
Max. 600 mm (23
5
/
8
”) in length
Effective Scanning Width: 208mm (8
3
/
16
”)
Recording Paper Size: 216 mm max. 30 m (8
1
/
2
”•~98’) roll
Effective Printing Width: 208 mm (8
3
/
16
”)
Transmission Time*: Approx. 15 s/page (Original mode)**
Approx. 30 s/page (G3 Normal mode)
Scanning Density: Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)—STANDARD mode
7.7 lines/mm (196 lines/inch)—FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch)—SUPER FINE mode
Halftone Level: 64-level
Scanner Type: Contact Image Sensor (CIS)
Printer Type: Thermal Printing
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment: 5ßC - 35ßC (41ßF - 95ßF), 45 % - 85 % RH (Relative Humidity)
Dimensions (H• ~W•~D): 122 mm•~338 mm•~240 mm (4
13
/
16
” •~13
5
/
16
”•~9
7
/
16
”)
Mass (Weight): Approx. 2.5 kg (5.5 lb.)
Power Consumption: Standby: Approx. 5.5 W
Transmission: Approx. 17 W
Reception: Approx. 30 W (When receiving the CCITT No. 1 Test Chart)
Copy: Approx. 30 W (When copying the CCITT No. 1 Test Chart)
Maximum: Approx. 120 W (When copying a 100 % black document)
Power Supply: 220 - 240 V AC, 50/60 Hz