ADJUSTMENTS
- 93 -
KX-FT21LA
Cover open button
Left
Right
Lever
1. ADJUSTING THE FEEDER PRESSURE
If no feeding or multiple feeding occurs frequently, adjust the feeder pressure.
(1) Open the front lid by pressing the front lid open.
(2) Shift the position of the lever using an instrument
with a pointed end, such as paper clip.
Right: When documents do not feed.
Center: Standard position (pre-selected)
Left: When documents multiple feed.
(3) Close the front lid by gently pressing down on both ends.
Note:Touch the lever using an instrument with a pointed end
such as ball-point pen because the lever is located in a
small place.
To Next Page
Loading...
